CODA LAN LED Off: Troubleshooting Guide

CODA LAN LED Off

  1. Check that the power to the modem is ON and that both ends of the Ethernet cable are securely connected to the modem and computer.
  2. Check that you are using the Ethernet cable that HITRON supplied for this product.
  3. If the problem remains, it could be that the Ethernet cable is damaged.​

    • Related Articles

    • CODA LED Overview

      You can use the LEDs to verify status and connections. The following table lists and describes each LED on the front panel of the cable modem.

    • CODA User Manual

      I. Hardware Overview Getting Started What's in the Box Minimum System Requirements Product Overview Front Panel Rear Panel Product Label II. Connecting the Cable Modem Where to place your Cable Modem Connect your Cable Modem to a Computer III. ...

    • CODA Hardware Overview

      Hitron’s CODA DOCSIS 3.1 Cable Modem provides an ultra-fast high-speed cable Internet connection with speeds up to 2 Gbps*. Use your CODA to directly connect a computer or a router to your Cable Internet service through an Ethernet connection. The ...

    • Connecting your CODA Modem

      Connect your Cable Modem to a Computer You must connect the cable modem directly to a computer during the installation and activation. After installation and activation, you can connect the cable modem to a router (see Connect Your Cable Modem to a ...

    • What lights should be "ON" (lit) my CODA cable modem?

      Power LED is Green and Steady LAN LED is Green and Steady Online LED is Green and Steady Upstream LED is either Green or Blue and Steady Downstream LED is either Green or Blue and Steady