CODA56 POWER LED is Off

1. Press the POWER button once to see if the LED is on and if the equipment turns on.

2. Make sure that the power adapter is securely connected to your modem and securely connected to a working electrical outlet.

3. Check that the electrical outlet is working. Is the outlet controlled by a light switch?

4. Check that you are using the power adapter that HITRON supplied for this product.

5. If the problem remains, it could be an issue with the power adaptor.

(Note: Only use a supplied HITRON power adapter to avoid any potential equipment damages.)

If the problem persists, contact technical support for help at https://us.hitrontech.com/support.

• Related Articles

• CODA POWER LED Off

  Press the POWER button once to see if the LED is on and if the equipment turns on. Make sure that the power adapter is securely connected to your modem and securely connected to a working electrical outlet. Check that the electrical outlet is ...

• CODA LED Overview

  You can use the LEDs to verify status and connections. The following table lists and describes each LED on the front panel of the cable modem.

• CODA Online LED Off

  If the Online LED is off, the modem is offline and not connected to the Internet. Make sure that you have activated your Internet Service with your Internet Service Provider. Check that the coaxial cable connections are secure at the modem and at the ...

• CODA LAN LED Off

  Check that the power to the modem is ON and that both ends of the Ethernet cable are securely connected to the modem and computer. Check that you are using the Ethernet cable that HITRON supplied for this product. If the problem remains, it could be ...

• CODA User Manual

  I. Hardware Overview Getting Started What's in the Box Minimum System Requirements Product Overview Front Panel Rear Panel Product Label II. Connecting the Cable Modem Where to place your Cable Modem Connect your Cable Modem to a Computer III. ...