The Hitron CODA60 features a single multicolor LED that displays the modem's operating status.
The LED color and blinking pattern help you identify whether your modem is starting up, connecting to your Internet provider, downloading software, or experiencing a problem.
LED Status | What It Means | ||||
Solid Green | The modem is receiving power and booting. | ||||
Alternating White and Green | The modem is searching for a downstream frequency on the cable connection. | ||||
Blinking White | The modem is connecting to your ISP's DOCSIS network and downloading configuration information. | ||||
Solid White | The modem is online. | ||||
Alternating White and Cyan | A software upgrade or downgrade is in progress. | ||||
Blinking Red | The modem is not receiving a DOCSIS signal. | ||||
Slow Blinking Red |
| ||||
Solid Red | The modem is experiencing a hardware failure. | ||||
| Release the Reset button to begin the factory reset process. |
When your CODA60 is online and operating normally, the LED should be solid white.
During initial installation or after restarting, allow up to 10 minutes for the modem to establish its connection.
Blinking Red: Check the coaxial cable connection. Contact your ISP if the modem continues to receive no DOCSIS signal.
Slow Blinking Red: Contact your ISP to verify modem activation and provisioning.
Solid Red: Restart the modem. If the LED remains solid red, contact Hitron Technical Support.
Important: If the LED alternates between white and cyan, do not disconnect the modem from power. A software update is in progress.