The Hitron xIQ D60 5G Router is designed to auto-detect and manage its method of broadband connectivity, seamlessly switching between wired and mobile broadband connections. Here's how you can manage and change the Internet connection mode to suit your needs.

Understanding Auto-Detection and Connectivity

The D60 router automatically detects whether it is connected to a wired or mobile broadband network and manages the connection accordingly:

• Mobile Broadband Only:

  • The router will use the SIM card credentials to connect to the cellular network and establish an internet connection if no additional Ethernet connections are made.
  • Ensure the SIM card is correctly inserted into the slot at the bottom of the D60. Refer to the Quick Install Guide for assistance.

• Wired Internet Only:

  • When a wireline modem or fiber ONT is connected to the WAN Ethernet port on the back of the unit, the router will use this wired connection as the primary source for internet traffic.
  • In this configuration, all internet traffic will use the wired connection unless the wireline internet service goes offline, in which case the router will automatically failover to the cellular connection.
    

Switching Between Wired and Mobile Broadband

You can easily switch between wired and mobile broadband by managing your physical connections:

1. Switch to Mobile Broadband Only:

   • Disconnect the Wireline Connection: Unplug the Ethernet cable from the WAN port on the back of the router. The D60 will automatically detect the absence of a wired connection and switch to the mobile broadband connection using the SIM card.
   • Verify Connection: Check the 4G or 5G LED on the router to confirm it has connected to the cellular network.

2. Switch to Wired Internet Only:

   • Connect the Wireline Service: Plug an Ethernet cable from your wireline modem or fiber ONT into the WAN port on the back of the router. The D60 will detect this connection and prioritize it for internet traffic.
   • Verify Connection: Ensure the Internet LED is on, indicating a successful wired connection.
     

Additional Configuration

For more detailed instructions on setting up and configuring your D60 router, refer to the Quick Install Guide included with your device. This guide provides step-by-step assistance for ensuring your router is correctly configured for both wired and mobile broadband connections.

Conclusion

The Hitron xIQ D60 5G Router makes it easy to switch between wired internet and mobile broadband by automatically detecting the connection type based on your setup. Simply connect or disconnect the wireline internet service as needed to switch between modes, and refer to the Quick Install Guide for any additional assistance.