Changing the Primary SSID (Service Set Identifier) of your D60 5G Router can be done directly via the D60 Router's web-based UI. Follow the instructions below to update your network's SSID.

Step 1: Initial Setup

• Reference: Setting up the Primary SSID is typically done during the initial installation and onboarding process. Please refer to the Quick Install Guide for detailed instructions.

Step 2:  Changing the Primary SSID via D60 Router UI

1. Access the Router UI:

   • Web Browser: Open a web browser on a device connected to the router.
   • Router Login: Enter the router’s IP address in the browser’s address bar and log in with your administrator credentials.

2. Navigate to WiFi Settings:

   • Menu Navigation: Use the options on the left-hand side of the UI to navigate to ‘WiFi’ ➝ ‘Wi-Fi Basic Settings’.
     
   • ​
     

3. Edit the SSID:

   • Primary SSID: Locate the Primary SSID field and enter the new SSID you wish to use.

4. Save the Changes:

   • Apply Changes: Save your changes to update the SSID.

5. Reconnect Devices:

   • Reconnect: Just like with the mobile app, you will need to reconnect any devices to the new SSID.

Step 3: Final Check

• Verify Connection: After changing the SSID, ensure that all devices can connect to the new network name without issues.

Conclusion

Changing the Primary SSID on your xIQ D60 5G Router is a straightforward process. Follow the steps provided for each method to update your network's SSID and ensure your devices are reconnected to the new network name.