Hitron CODA56 DOCSIS 3.1 Cable Modem - How to Access the GUI

How do I access the GUI on the CODA56?

The ability to access Hitron’s CODA56 GUI requires firmware version 7.3.5.0.1b2 or higher.  This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of firmware updates lies with the Service Provider.

Hitron does NOT provide end-users with a direct link to downloadable firmware for cable modems.  Instead, firmware updates are handed over to the Service Provider, who test and distribute the firmware to the respective cable modems on their network.  This firmware is currently available for Comcast, Charter, and Cox Subscribers.

How to Access the GUI:

What you will need:

  • Laptop or computer connected via Ethernet and configured with a STATIC IP  set to the 192.168.100.x subnet (see links below)

Static IP for MacIntosh

Static IP for Windows

 

Steps to Access the GUI:

  • Connect and power up the CODA56 modem
  • Connect the Laptop/computer via Ethernet cable to the CODA56 modem
  • From the Laptop/computer, open any browser to go to https://192.168.100.1
  • A Status menu displays:

The Status menu contains the following sections:

  • System Information
  • DOCSIS WAN
  • LAN Port Status

 

Status:  System Information

The System Information screen displays general information about your CODA56’s hardware, software, and its connection to the Internet.

 

Status:  DOCSIS WAN

Displays both Upstream and Downstream signal parameters, including OFDM Downstream & Upstream Overview, and OFDMA Upstream Overview.

 

 

Status:  LAN Port Status

Displays LAN port status, speed and Duplex status for each LAN port.


    • Related Articles

    • How do I access the GUI on the CODA?

      The ability to access Hitron’s CODA GUI requires firmware version 7.3.5.0.1b2 or higher. This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of ...
    • Can I change the User Name and Password to Access the Hitron CODA Modem?

      Issue: You want to change the user name and password to access your Hitron CODA modem. Solution: Unfortunately, you cannot change the user name and password for the Hitron CODA modem. They are statically set to "admin" and "admin". Explanation: While ...
    • Can I log into the CODA modem to see its settings?

      Yes. You can access the CODA Modem GUI to see the following: System Information DOCSIS WAN LAN Port Status Click here to learn more.
    • CODA User Manual

      I. Hardware Overview Getting Started What's in the Box Minimum System Requirements Product Overview Front Panel Rear Panel Product Label II. Connecting the Cable Modem Where to place your Cable Modem Connect your Cable Modem to a Computer III. ...
    • Does the CODA Cable Modem Include WiFi?

      No, the CODA Cable Modem is solely a modem and does not include a built-in wireless router. If you require wireless connectivity, you will need to purchase a separate wireless router. Once you have the router, you can connect it to the CODA Cable ...