How do I access the GUI on the D60?

How do I access the GUI on the D60?


To access the GUI (Graphical User Interface) of the router,
  1. Connect a mobile phone or computer to the D60 Wi-Fi or use an ethernet cable to connect to the device.
  2. Open a web browser and navigate to the URL http://172.30.55.1
Note: The default address is 172.30.55.1

You should see the xIQ login page.


  1. The username will be 'cusadmin'.
  2. The password will be listed on the label of your D60.
Note: It's important to customize this password and the xIQ mobile app will remind users to customize it as part of the security assessment done in the app. Please make sure to record this password in a secure place.


In the event you've lost your GUI password, you can:
  • Use the xIQ mobile app to make whatever changes to your network that you need.
  • Attempt to factory reset your D60 in order for the password to return to the value on the device label.
  • Note this will reset all device settings to default, impacting all devices in your home and require you to setup your home network again.
  • Contact Hitron Support and we can set a temporary password for you.


    • Related Articles

    • How do I access the GUI on the CODA?

      The ability to access Hitron’s CODA GUI requires firmware version 7.3.5.0.1b2 or higher. This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of ...

    • How do I access the GUI on the CODA56?

      The ability to access Hitron’s CODA56 GUI requires firmware version 7.3.5.0.1b2 or higher. This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of ...

    • How to login to the HTEM5 GUI

      NOTE: HTEM5 MoCA Adapters are pre-configured and do not require manual configuration, however, for ADVANCED users who wish to make changes to the configuration of their HTEM5 MoCA Adapters, we are providing the following instructions. Using ...

    • How to login to the HTEM4 GUI

      Login Using Windows-based PC or MAC Connect the HT-EM4 Adapter to a Windows PC or MAC Using an Ethernet cable, plug one end of the Ethernet cable into the adapter and the other end into a Windows PC or MAC. Power on the adapter by plugging in the ...

    • Can I change the User Name and Password to Access the Hitron CODA56 Modem?

      Issue: You want to change the user name and password to access your Hitron CODA56 modem. Solution: Unfortunately, you cannot change the user name and password for the Hitron CODA56 modem. They are statically set to "admin" and "admin". Explanation: ...