Before using your Hitron CODA60 cable modem, you must activate it with your Internet Service Provider (ISP).
Your ISP needs your modem's Cable Modem MAC (CM MAC) address to register and activate the CODA60 on its network.
Before installation, make sure your Internet provider supports the CODA60.
The CODA60 is approved for use with GCI and Midco. Contact your ISP to confirm compatibility with your specific service plan and address.
If you are replacing an existing cable modem, disconnect the old modem.
Connect the coaxial cable from your cable wall outlet to the CODA60.
Make sure the coaxial cable is securely connected.
Connect the CODA60's power adapter to an electrical outlet.
Find the CM MAC address on the product label of your CODA60.
Your ISP uses this address to identify and activate your modem.
Be sure to provide the CM MAC address, not the serial number or another MAC address.
Follow your ISP's activation instructions.
Depending on your provider, activation may be available through its website, mobile app, or customer support team.
Provide your CODA60's CM MAC address when requested.
Allow up to 10 minutes for your modem to complete startup and connect to your ISP.
During startup, the LED may display:
Solid Green: The modem is receiving power and booting.
Alternating White and Green: The modem is searching for a downstream frequency.
Blinking White: The modem is connecting to your ISP's DOCSIS network and downloading configuration information.
Solid White: Your modem is online.
Once your CODA60 is online:
Connect the Ethernet cable from the CODA60's orange Ethernet port to your router's WAN or Internet port.
Power-cycle your router.
Connect your computer or smartphone to your router.
Open a website to verify that your Internet connection is working.
If the LED does not become solid white, contact your ISP and ask it to verify:
Your CODA60's CM MAC address.
Modem activation and provisioning.
Compatibility with your service plan.
Cable signal and service availability.
Important: Hitron does not activate Internet service. Activation must be completed by your ISP.