You can test the Internet speed delivered through your Hitron CODA60 using a computer and a wired Ethernet connection.
For the most accurate results, test using equipment that supports the speeds included in your Internet plan.
Before testing, confirm the download and upload speeds included in your Internet Service Provider's (ISP) plan.
Your actual Internet speed will depend on your ISP's network and service configuration.
For a direct wired speed test:
Disconnect the Ethernet cable connecting your CODA60 to your router.
Connect an Ethernet cable from the CODA60's orange Ethernet port directly to your computer.
Make sure your computer has an Ethernet port or adapter that supports your subscribed Internet speed.
Restart the CODA60 and allow it to reconnect. Wait until the LED becomes solid white.
Confirm that your computer has an Internet connection.
Note: Some ISPs may require a modem restart when changing the connected device. If your computer does not receive an Internet connection, contact your ISP.Close unnecessary applications, downloads, and streaming services.
Open a web browser.
Visit your ISP's recommended speed test website or a reputable service such as Speedtest by Ookla.
Start the speed test.
Record your download and upload speeds.
For more consistent results, run the test several times.
Your speed test results may be limited by your computer's Ethernet connection.
1 Gbps Ethernet adapter: Your test results will be limited to approximately 1 Gbps or less.
2.5 Gbps Ethernet adapter: Your computer can test higher-speed Internet plans, up to the limits of the adapter and other equipment.
10 Gbps Ethernet adapter: Your computer can test multi-Gigabit Internet plans when the rest of the equipment supports those speeds.
Compare your wired speed test results with the download and upload speeds included in your ISP's plan.
Check your Ethernet cable and computer's Ethernet port speed.
Restart your CODA60 and test again.
Try another compatible Ethernet cable or computer, if available.
Contact your ISP to verify your modem provisioning, cable signal, and Internet service performance.
After completing the speed test:
Disconnect the computer from the CODA60.
Reconnect the Ethernet cable between the CODA60 and your router's WAN port.
Restart the CODA60 and wait until the LED becomes solid white.
Restart your router.
Confirm that your WiFi and wired devices can access the Internet.
Important: A speed test measures the Internet speed available to your connected device. It does not directly measure the CODA60's maximum hardware capability or its 10 Gbps Ethernet link speed.