Before using your Hitron CODA60 cable modem, you must activate it with your Internet Service Provider (ISP).
Your ISP uses the modem's Cable Modem MAC (CM MAC) address to register and activate the CODA60 on its network.
The CODA60 is approved for use with GCI and Midco.
Before installation, confirm that your ISP supports the CODA60 for your specific Internet plan and service address.
If you are replacing an existing cable modem, disconnect the old modem.
Connect the provided coaxial cable from the cable wall outlet to your CODA60.
Make sure the coaxial cable is securely connected.
Connect the supplied power adapter to the CODA60 and an electrical outlet.
Allow up to 10 minutes for the modem to complete startup.
Find the CM MAC address on the product label of your CODA60.
This unique address identifies your modem to your ISP.
Make sure you provide the CM MAC address, not the modem's serial number.
Follow the activation instructions provided by your ISP.
Depending on your provider, activation may be available through its website, mobile app, or customer support team.
Provide your CODA60's CM MAC address when requested.
During startup, the LED may display several colors:
Solid Green: The modem is booting.
Alternating White and Green: The modem is searching for a downstream frequency.
Blinking White: The modem is connecting to your ISP's DOCSIS network and downloading configuration information.
Solid White: The modem is online.
Allow up to 10 minutes for the CODA60 to connect.
Connect an Ethernet cable from the CODA60's orange Ethernet port to your router's WAN or Internet port.
Power-cycle your router.
Connect your computer or smartphone to your router.
Open a web browser to test your Internet connection.
If your modem does not come online, contact your ISP and ask it to verify:
Your CM MAC address.
Modem activation and provisioning.
Compatibility with your Internet plan.
Cable signal and service availability.
Important: Hitron does not activate Internet service. Your ISP must activate and provision your CODA60.