The CODA60 is a cable modem and does not include built-in WiFi. You will need a separate router or mesh system to provide wireless Internet throughout your home.
Follow these steps to connect your CODA60 to your router.
Before connecting your router, confirm that your CODA60 is connected to your Internet Service Provider's (ISP) network.
The LED on the CODA60 should be solid white, indicating that the modem is online.
If the LED is not solid white, allow up to 10 minutes for the modem to connect.
If your modem does not come online, check the coaxial cable connection and contact your ISP to verify activation.
Locate the orange 10 Gigabit Ethernet port on the back of your CODA60.
Connect one end of an Ethernet cable to this port.
Connect the other end to the WAN or Internet port on your WiFi router.
For the best performance with a 10 Gbps router connection, we recommend a Cat6a Ethernet cable.
After connecting the Ethernet cable:
Disconnect power from your router.
Wait 30 seconds.
Reconnect power to your router.
Allow the router a few minutes to establish its Internet connection.
Important: The CODA60 Quick Install Guide recommends power-cycling your router before testing the Internet connection.Connect your smartphone, tablet, computer, or other devices to your router using WiFi or Ethernet.
Open a web browser and visit a website to confirm your Internet connection is working.
If the CODA60 LED is solid white but your router cannot access the Internet:
Check the Ethernet cable between your CODA60 and router.
Make sure the cable is connected to the router's WAN or Internet port, not a LAN port.
Restart your router.
Check your router's Internet connection settings.
If the problem continues, contact your ISP or router manufacturer for additional assistance.
Remember: The CODA60's 10 Gigabit Ethernet port supports high-speed connectivity, but your actual Internet speed depends on your ISP's service plan and your router's capabilities.