How to Reset the HTEM4 to Factory Default Settings: Troubleshooting Guide

How to reset the HTEM4 to Factory Default Settings



 

To REBOOT (or restart) the HTEM4 MoCA Adapter:

  1. Unplug the HTEM4 Adapter from the power outlet and wait a few seconds.
  2. Plug the HTEM4 Adapter back into the power outlet.
  3. Within 3 minutes, check that the Power and MoCA LEDs on your HTEM4 Adapters are solid GREEN (to indicate that your HTEM4 is receiving power and that a MoCA connection has been established between HTEM4 Adapters.).

    NOTE:The MoCA connection may take up to 10 minutes to establish.

 

To RESTORE the HTEM4 configuration back to Factory Default Settings:

NOTE:  Factory resetting your HTEM5 Coax to Ethernet Adapter will restore the HTEM5 Adapter back to its original factory default settings and any settings that you have modified will be lost and cannot be recovered.

Factory Reset the HTEM4 Adapter:

To RESTORE the HTEM4 configuration back to Factory Default Settings, locate the RESET button on the rear panel of the HTEM4 Adapter.

  1. Insert the end of a paper clip or other small object with a narrow tip into the RESET opening on the back of your HTEM4 Adapter.
  2. Press and hold the Reset button for 10 to 15 seconds or more to reset the HTEM4 back to its factory default settings.

    • Related Articles

    • How to reset the HTEM5 to Factory Default Settings?

      To REBOOT (or restart) the HTEM5 MoCA Adapter: Unplug the HTEM5 Adapter from the power outlet and wait a few seconds. Plug the HTEM5 Adapter back into the power outlet. Within 3 minutes, check that the Power and MoCA LEDs on your HTEM5 Adapters are ...

    • How do I Factory Reset my CODA56 cable modem?

      Restore (resets to Factory Default Settings) the cable modem. *NOTE: If you restore the CODA56, any modified settings cannot be recovered. 1. Insert the end of a paper clip or other small object with a narrow tip into the Reset opening of the back of ...

    • How do I Factory Reset my CODA cable modem?

      Factory Reset To Restore your CODA modem back to Factory Default Settings: NOTE: If you restore the CODA, any modified settings cannot be recovered. 1. Insert the end of a paper clip or other small object with a narrow tip into the Reset opening of ...

    • D60 How do I factory reset my D60 5G?

      Factory Resetting your D60 Gateway can be done in 3 ways. Option 1: Using the xIQ Mobile App From the main app screen navigate to 'Settings' and under the "Gateway" section of the settings page you will find an option to factory reset your gateway. ...

    • How to login to the HTEM4 GUI

      Login Using Windows-based PC or MAC Connect the HT-EM4 Adapter to a Windows PC or MAC Using an Ethernet cable, plug one end of the Ethernet cable into the adapter and the other end into a Windows PC or MAC. Power on the adapter by plugging in the ...