How to test the HTEM5 MoCA Adapters to see if they are functioning properly
Take a coaxial cable and connect it between the top ports of both MoCA adapters.
Power on both adapters and wait for about a minute.
Check the MoCA lights on the bottom of the adapters. If they turn blue after a minute or two, it means the adapters are communicating properly through the coaxial cable.
- Optionally, connect an Ethernet cable between the two adapters. If everything is working correctly, you should see all LED lights on both adapters lit up – two blue and two green lights.
Note: If the lights don't display as described, there might be an issue with the setup or with one of the adapters. Double-check the connections and try again. If problems persist, further troubleshooting or contacting customer support may be necessary.
These steps help ensure that your MoCA adapters are functioning correctly before integrating them into your home network.
If this test is successful, then the next step would be to verify that the 2nd Coax Outlet that you want to attach a MoCA Adapter to is connected to the main Coax Splitter in your house. Often times, you can find this splitter in a Utility Closet. OR you can take the 2nd MoCA Adapter to another Coax Outlet and see if it can link to the first MoCA Adapter.
Related Articles
How to test the HTEM4 Adapters to ensure that they are functioning properly
Take a coaxial cable and connect it between the top ports of both MoCA adapters. Power on both adapters and wait for about a minute. Check the MoCA lights on the bottom of the adapters. If they turn blue after a minute or two, it means the adapters ...How do I know if my splitter is MoCA 2.5 compatible?
If you are having difficulty getting your Coax to Ethernet MoCA Adapters to work, the below information may be useful in your troubleshooting. Splitter Compatibility with MoCA Technology All splitters need to perform in the frequency range of 1000 ...Do I need to configure the HTEM5 MoCA adapters manually?
In most cases, MoCA adapters come pre-configured and do not require manual configuration. They should work out of the box by establishing a connection automatically. However, if you want to customize specific settings, Hitron HTEM5 adapters offer a ...Can I use the HTEM5 MoCA adapters with my existing Wi-Fi network?
Yes, MoCA adapters can be used alongside your existing WiFi network. MoCA 2.5 Adapters complement WiFi by providing a wired Ethernet connection over coaxial cables, which can improve your network performance and extend your Ethernet coverage to areas ...Can I use HTEM5 MoCA adapters if I have cable TV service?
Yes, you can use HTEM5 MoCA adapters with your cable TV service. MoCA signals operate on different frequencies than cable TV signals, allowing them to coexist without interference. Ensure that you install a MoCA filter at the point where the coaxial ...