Troubleshooting APEX2008: One Ethernet Port Is Not Working

One or Two Ethernet Ports Are Not Working (APEX2008)

Try the following:
  1. Test each port with the same device and cable
  2. Use a known-working Ethernet cable.
  3. Check for LED activity on that port.
If multiple devices and cables do not work on the same port, the port may be faulty.


Info

Need More Help?

If you need additional assistance, our Technical Support Team is available 7 days a week, from 6:00 AM to 8:00 PM PT. Visit https://us.hitrontech.com/contact-support/ to chat live with a support agent and get immediate help with your Hitron device.



    To start please register your product here.

      • Related Articles

      • One Ethernet Port Is Not Working (APEX2005)

        To isolate the issue: Connect a known-working device to the port. Use a known-working Ethernet cable. Check for LED activity on that port. If multiple devices and cables do not work on the same port, the port may be faulty. Need More Help? If you ...

      • Can both Gigabit Ethernet ports on the CODA be used at the same time?

        The CODA cable modem has two Gigabit Ethernet ports. Each Gigabit port requires a WAN IP address from your Internet Service Provider. Since most ISPs do not offer more than one WAN IP Address per residence, you will, most likely, only use one of the ...

      • Do I Need One or Two HTEM4 MoCA Adapters?

        MoCA Adapters work by creating a point-to-point Ethernet-over-coax connection. This means that you need a MoCA adapter at both ends of the connection, unless your router already has MoCA built in. When You Need Two Adapters: Your router does NOT have ...

      • Can I Connect One APEX2005 Ethernet Switch to Another?

        Yes. You can connect one Ethernet switch to another using a standard Ethernet cable. Tips: Connect from any port on the first switch to any port on the second switch No special “uplink” port is required Avoid creating loops (do not connect switches ...

      • Can I Connect One APEX2008 Ethernet Switch to Another?

        Yes. You can connect one Ethernet switch to another using a standard Ethernet cable. Tips: Connect from any port on the first switch to any port on the second switch No special “uplink” port is required Avoid creating loops (do not connect switches ...