Troubleshooting: The APEX2005 Switch Feels Warm — Is That Normal?

The APEX2005 Switch Feels Warm — Is That Normal?

Yes.

The APEX2005 uses a fanless, passive cooling design, which can cause the case to feel warm during normal operation.

Make sure:
  1. The switch is in a well-ventilated area
  2. Nothing is placed on top of the switch
  3. Airflow around the device is not blocked


Info

Need More Help?

If you need additional assistance, our Technical Support Team is available 7 days a week, from 6:00 AM to 8:00 PM PT. Visit https://us.hitrontech.com/contact-support/ to chat live with a support agent and get immediate help with your Hitron device.


    To start please register your product here.
      • Related Articles

      • The APEX2008 Switch Feels Warm — Is That Normal?

        Yes. The APEX2008 uses a fanless, passive cooling design, which can cause the case to feel warm during normal operation. Make sure: The switch is in a well-ventilated area Nothing is placed on top of the switch Airflow around the device is not ...
      • Installation of the APEX2005 Ethernet Switch

        To install the APEX2005, follow these steps: Connect the included power adapter to the power port on the switch. Plug the power adapter into a wall outlet. Wait for the Power LED to turn solid green. Connect an Ethernet cable from your router to any ...
      • Installation of the APEX2008 Ethernet Switch

        To install the APEX2008, follow these steps: Connect the included power adapter to the power port on the switch. Plug the power adapter into a wall outlet. Wait for the Power LED to turn solid green. Connect an Ethernet cable from your router to any ...
      • Can I Connect One APEX2005 Ethernet Switch to Another?

        Yes. You can connect one Ethernet switch to another using a standard Ethernet cable. Tips: Connect from any port on the first switch to any port on the second switch No special “uplink” port is required Avoid creating loops (do not connect switches ...
      • The APEX2005 Switch Stopped Working After a Power Outage

        Unplug the switch from power. Wait 30 seconds. Plug the switch back in and wait for the Power LED to turn solid green. Check Ethernet port LEDs. If the switch does not power on, contact Support. Need More Help? If you need additional assistance, our ...