The Power LED Is On, but My Devices Are Not Connecting (APEX2008)
This usually indicates a cabling or device issue.
- Make sure Ethernet cables are firmly connected at both ends.
- Try a different Ethernet cable.
- Plug the device into a different switch port.
- Restart the connected device.
If the device works when connected directly to your router, the issue may be with the cable or port being used.
Need More Help?
If you need additional assistance, our Technical Support Team is available 7 days a week, from 6:00 AM to 8:00 PM PT. Visit https://us.hitrontech.com/contact-support/ to chat live with a support agent and get immediate help with your Hitron device.
Related Articles
The Power LED Is On, but My Devices Are Not Connecting (APEX2005)
This usually indicates a cabling or device issue. Make sure Ethernet cables are firmly connected at both ends. Try a different Ethernet cable. Plug the device into a different switch port. Restart the connected device. If the device works when ...CODA LED Overview
You can use the LEDs to verify status and connections. The following table lists and describes each LED on the front panel of the cable modem.Connecting Additional Devices to the APEX2005
Connect an Ethernet cable from each additional device to any available Ethernet port on the switch. You can connect devices such as: Computers and laptops Smart TVs Gaming consoles Access points Servers or network storage The switch automatically ...Connecting Additional Devices to the APEX2008
Connect an Ethernet cable from each additional device to any available Ethernet port on the switch. You can connect devices such as: Computers and laptops Smart TVs Gaming consoles Access points Servers or network storage The switch automatically ...My D60 Power LED is not ON
If the Power LED on your Hitron D60 5G Router is not on, it indicates that the device may not be receiving power. Follow the steps below to troubleshoot and resolve the issue. Steps to Check Power Connection Use the Included DC Power Adapter: Ensure ...