What Do the APEX2008 LED Colors Mean During Troubleshooting?
Answer:
- Green (Solid): 2.5 Gbps Ethernet connection detected
- Green (Blinking): 2.5 Gbps connection with active traffic
- Amber (Solid): 1000 / 100 Mbps Ethernet connection detected
- Amber (Blinking): 1000 / 100 Mbps connection with active traffic
- No Light: No Ethernet connection detected
No light usually indicates a cable or device issue.
Need More Help?
If you need additional assistance, our Technical Support Team is available 7 days a week, from 6:00 AM to 8:00 PM PT. Visit https://us.hitrontech.com/contact-support/ to chat live with a support agent and get immediate help with your Hitron device.
Related Articles
What Do the APEX2005 LED Colors Mean During Troubleshooting?
Answer: Green (Solid): 2.5 Gbps Ethernet connection detected Green (Blinking): 2.5 Gbps connection with active traffic Amber (Solid): 1000 / 100 Mbps Ethernet connection detected Amber (Blinking): 1000 / 100 Mbps connection with active traffic No ...CODA LED Overview
You can use the LEDs to verify status and connections. The following table lists and describes each LED on the front panel of the cable modem.HTEM5 Troubleshooting Checklist
When troubleshooting your MoCA Adapters and MoCA Network, we recommend the following steps to help you either pin-point, or narrow down the cause of your issues: Check the physical connections Reboot the HTEM5 Verify the LEDs Factory Reset STEP 1: ...What do the LED lights on the D60 mean?
Refer to the Quick Start Guide or the LED Status article on the support site to understand power, WiFi, and 5G/LTE connection indicators.My D60 4G LED is not ON
If you're experiencing an issue with your Hitron D60 where the 4G LED is not on, here's a guide to help you understand and resolve the issue. Understanding the 4G and 5G LEDs 4G LED: This indicator light will be on if your Hitron D60 is connected to ...