A red LED on your Hitron CODA60 indicates a problem that may prevent your modem from connecting to the Internet.
The meaning depends on whether the LED is blinking or solid.
A blinking red LED means your CODA60 is not receiving a DOCSIS signal from your Internet Service Provider (ISP).
What to do:
Make sure the coaxial cable is securely connected to the CODA60 and your cable wall outlet.
Check that the coaxial cable is not visibly damaged.
Restart your CODA60 and allow up to 10 minutes for it to reconnect.
If the LED continues blinking red, contact your ISP to check your cable signal and service.
A slowly blinking red LED means your CODA60 is experiencing a provisioning issue.
Your modem may not be properly activated or configured on your ISP's network.
Confirm that your ISP supports the CODA60.
Make sure your ISP has activated the modem using the correct CM MAC address.
Contact your ISP to verify that the modem is properly provisioned on your account.
A solid red LED indicates that your CODA60 is experiencing a hardware failure.
Disconnect the CODA60 from power.
Wait 30 seconds and reconnect the power.
Allow the modem to restart.
If the LED returns to solid red, contact Hitron Technical Support.
