What speeds can I expect with the HTEM5 adapters?
You will need at least two HTEM5 Adapters to create a MoCA network. Please note, if you have a MoCA-capable broadband modem or router, only need one HTEM5. If your router does not support MoCA, you will need two MoCA devices, one for your router and one for the Ethernet device that you want to connect.
To start please register your product here.
Related Articles
HTEM4 Speeds Explained – What to Expect with 1 Gbps Ethernet
The HTEM4 uses MoCA 2.5 technology, but it features a 1 Gbps Ethernet port. Here's what that means for performance: MoCA 2.5 Network Speed: Up to 2.5 Gbps of shared bandwidth over coax Supports multiple devices with low latency HTEM4 Ethernet Speed: ...
What speeds can I expect from the D60?
The D60 5G supports theoretical 5G speeds up to 3.4 Gbps and WiFi 6 speeds up to 5.4 Gbps. Real-world speeds depend on your carrier, signal strength, network congestion, and connected devices.
How to test the HTEM4 Adapters to ensure that they are functioning properly
Take a coaxial cable and connect it between the top ports of both MoCA adapters. Power on both adapters and wait for about a minute. Check the MoCA lights on the bottom of the adapters. If they turn blue after a minute or two, it means the adapters ...
Can I use HTEM5 MoCA adapters with any Internet Service Provider (ISP)?
Yes, Hitron’s HTEM5 MoCA adapters are compatible with any Internet Service Provider. They operate independently of your ISP and can be used to extend your network regardless of the service provider you use. However, for best results, the HTEM5 should ...
HTEM5 User Manual
Welcome to the HTEM5 Digital User Manual, designed to be your comprehensive guide to the HTEM5 MoCA Network Adapter. Within each section, you'll find direct web links to online articles, providing you with instant access to the most current and ...