Where to place your CODA56 Cable Modem

Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product.

Do not locate the cable modem where it will be exposed to moisture or excessive heat.

1. Place the Modem in a location where it can be connected to the various devices as well as to a power source.
   
2. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard.
   
3. The Modem can be placed on a shelf or desktop.
   
4. Keep away from the strong electromagnetic radiation and electromagnetic devices.
   
5. The product should be properly grounded (earthed) by connecting to a cable distribution system in accordance with ANSI/NFPA 70, the National Electrical Code (NEC) - Section 820.93 - Grounding of Outer Conductive Shield of a Coaxial Cable.
   

The cable modem provides a connection between your cable Internet provider’s network and your computer, router, or WiFi router. Before installing the modem, choose a location where your computer and modem are near existing cable and electrical wall outlets.

• Related Articles

• I have No Internet Connection with my CODA Modem

  If you are replacing an existing cable modem, make sure that you have activated and registered your new cable modem with your Internet Service Provider. To activate your cable modem, contact your cable Internet provider or visit their website and ...

• Does the CODA modem retail box include a coax cable?

  Yes. Hitron CODA cable modem comes with a 6-foot coax cable – everything you need to get online fast.

• How do I restart my CODA cable modem?

  Restarting or rebooting your CODA cable modem resets your cable modem to your existing settings. To restart or reboot your CODA cable modem: Insert the end of a paper clip or other small object with a narrow tip into the Reset opening on the back of ...

• CODA Modem Rear Panel

  Product Label The cable modem product label is located on the rear panel of the cable modem and displays the serial number and MAC address of the cable modem. To activate Internet service, you will have to contact your service provider for ...

• Does the CODA cable modem work with WiFi Mesh?

  Yes. Pair the CODA cable modem with a WiFi Router to connect all of your WiFi devices to the Internet. This cable internet modem does NOT have a built-in wireless router.