Retail Support | Installation | Knowledge Base

To start please register your product here.

    • Popular Articles

    • Connecting the 1st HTEM5 Adapter

      Get a MoCA 2.5 Network Adapter and Ethernet Cable. Connect the Ethernet Cable from the Modem/Router to the MoCA 2.5 Network Adapter. Get the Coax Cable and connect the Coax Cable from the Coax Outlet on the wall to the Coax Port on the MoCA 2.5 ...

    • Important Safety Instructions

      Basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following: Do not use this product near water – for example, near a bathtub, kitchen sink, laundry tub, or swimming ...

    • Can I update the CODA56 Firmware?

      No, your Service Provider distributes cable modem firmware upgrades. The upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of firmware updates lies with the Service Provider. Firmware updates from ...

    • How do I access the GUI on the CODA56?

      The ability to access Hitron’s CODA56 GUI requires firmware version 7.3.5.0.1b2 or higher. This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of ...

    • CODA LED Overview

      You can use the LEDs to verify status and connections. The following table lists and describes each LED on the front panel of the cable modem.