Popular Articles
Connecting the 1st HTEM5 Adapter
Get a MoCA 2.5 Network Adapter and Ethernet Cable. Connect the Ethernet Cable from the Modem/Router to the MoCA 2.5 Network Adapter. Get the Coax Cable and connect the Coax Cable from the Coax Outlet on the wall to the Coax Port on the MoCA 2.5 ...
Important Safety Instructions
Basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following: Do not use this product near water – for example, near a bathtub, kitchen sink, laundry tub, or swimming ...
Can I update the CODA56 Firmware?
No, your Service Provider distributes cable modem firmware upgrades. The upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of firmware updates lies with the Service Provider. Firmware updates from ...
How do I access the GUI on the CODA56?
The ability to access Hitron’s CODA56 GUI requires firmware version 7.3.5.0.1b2 or higher. This firmware is only available from your ISP, since the upgrading of all cable modems is governed by DOCSIS standards, which mandate that the distribution of ...
Can both Gigabit Ethernet ports on the CODA be used at the same time?
The CODA cable modem has two Gigabit Ethernet ports. Each Gigabit port requires a WAN IP address from your Internet Service Provider. Since most ISPs do not offer more than one WAN IP Address per residence, you will, most likely, only use one of the ...